Scissors Lifts
  Models
  Standard Models  
  Custom Made
Models
 
  Model Number
Format
 
Standard Structures
Options  
Applications  
Special Projects  
       
Home Lifts
   
  Standard Structures
   
  1. STANDARD STRUCTURES
  (1) It's more than 4times su strong and as KTL SERIS and more than 3.5times compared with K SERIS.LOAD CONDITIONS:The
table is supposed to be evenly loaded.If a full loda is to be placed on the table all at once by a conveyer or a cart,another strength
check is required.From the short side of the table,load a half of the regular loading capacity,and from the long side,a quarter.
Unbalanced load should be avoided on the K SERIES lifter.
   
  (2) Operation
  K SERIES: Normally it's operated by a single-circuit for the foot switch or the 2-push-button switch.

KTL SERIES: As for 1-stage/2-stage type,it's normally operated by duble-circuit (with uppar limit LS) for the foot switch or the 2-push-button switch.

As for 3-stage/4-stage type,it's normally operated by doble circuit (with uppar / lower limit LS ) for the 3-push-button switch.
   
  2. FREQUENCY OF USE (MEASURES AGAINST HITH FREQUENCY)
  a. K SERIES: It's durable up to 150times / 8hours.It's possible to use up to 300 times with 300 times with a grease lubrication method(optional)

b. KTL SERIES: Up to 300 times / 8hours. It's durable up to 300 times / 8 hours. Some measures should be taken against high frequency if you use it more than 300 times.

* 300-1000 times Component material must be more than 6 times as strong as the standard use. Center pin bearing: Oilless SPB500. Quench and grind roller NAST and cylinder rod.

* 1000-2000 times Component material must be more than 8 times as strong as the standard use. Center pin / fixed pin bearing: Oilless SPB500 Quench and grind roller NAST and cylinder rod.

* 2000- Component material must be more than 10 times as strong as the standard use. Center pin / cylinder pin bearing: special bearing Fix pin:Oilless SPB500. Quench and grind roller NAST and cylinder rod.